Best of LinkedIn: Connected Tools & Equipment CW 45/46 2026

Reliability teams are learning that more sensor data does not equal better decisions. Value now comes from clean failure records, the right sampling rate and alerts that explain the cause and the next step. Field case studies show how often the real fault hides behind a calm overall reading. On the jobsite, cordless platforms keep replacing fuel and cords, from record-setting rotary hammers to battery cut-off saws.
Date
November 16, 2026
Connected Tools & Equipment
Thomas Allgeyer

Methodology: Every two weeks we collect most relevant posts on LinkedIn for selected topics and create an overall summary only based on these posts. If you´re interested in the single posts behind, you can find them here: https://linktr.ee/thomasallgeyer. Have a great read!

Listen to our podcast

If you prefer listening, check out our podcast summarizing the most relevant insights from Connected Tools & Equipment CW 45/ 46:

Maintenance strategy and leading indicators

  • Southwire cut reactive maintenance from 74% in 2024 to 19% by October 2026
  • Planning, scheduling and PM and PdM findings now feed the backlog with high-value work
  • Six strategies, from corrective to proactive, should match asset criticality and failure modes
  • Proposed leading indicators: deferred PMs, defects found by inspection, schedule compliance and backlog in crew-weeks
  • A 95% PM compliance rate says nothing about whether PMs actually find defects
  • Availability equals MTBF divided by MTBF plus MTTR
  • Operator reports only help when the CMMS loop closes with feedback

‍

Vibration diagnostics beyond the overall value

  • A 2.5 MW pump showed a 3X resonance near 3,600 RPM, around 180 Hz
  • A gear coupling failed after its energy median dropped by 280 Hz, so a falling signal was no recovery
  • Bearing teardowns on SKF 6221 and FAG 6222 confirmed electrical fluting per ISO 15243
  • A 4.1X peak on a vertical pump pointed to an outer race defect in a 6219 bearing
  • Gearbox routes should include envelope spectrum and time waveform, not just velocity
  • Factory vibration switches report one overall number and miss developing bearing defects
  • A 126 kW hydrogen compressor showed impact peaks near 100 m/s² and rising 5 to 8 kHz energy

‍

Industrial AI needs the right data and context

  • A 10 ms PLC scan gives 100 samples a second and never sees a bearing defect
  • At 25.6 kS/s, the envelope spectrum showed the defect frequency about 25 times higher
  • Schneider Electric embedded sensorless AI in a variable speed drive across 92 motors and 49 operating points
  • Per-motor calibration lifted accuracy from 96.2% to 98.6% with zero false positives
  • Mistral’s Timestral forecasts a day ahead from three weeks of 15-minute readings in 10 ms on a CPU
  • Sensors without recorded failure times add noise, not answers
  • Agentic alerts only change work when they explain the cause and recommend an action

‍

Sensors, grid assets and monitoring deployments

  • SKF’s CMDS R35 feeds triaxial vibration and temperature into automation systems over RS485 and Modbus RTU
  • SICK’s MPB10 with Sentio Analytics turns vibration, shock and temperature into maintenance decisions
  • Qualitrol correlates partial discharge, online DGA and a winding hot-spot above 110 °C to catch transformer faults
  • WIKA WEgrid monitors SF₆ in GIS switchgear to detect leaks earlier
  • Tractian’s Series D backs a platform trusted by over 2K factories
  • Band24’s Terra combines Bluetooth LE, LTE-M and satellites for equipment tracking, with launch planned for early 2027
  • The ITEA 4 ADVISOR project tests autonomous drone and vessel inspection for offshore wind

‍

Cordless tools and jobsite productivity

  • Hilti’s TE 8-22 set a Guinness World Records title with 3,131 holes in 24 hours
  • The DSH 900-22 cut-off saw matches 90cc gas performance with up to 80% lower CO₂
  • Its Active Torque Control shuts the motor off in under 1 second on kickback
  • The TE 1000-22 breaker removes up to 250 kg of concrete per charge
  • Groupe Raymond became the first Canadian customer of Hilti’s Digital Consumables Locker
  • Milwaukee’s M18 BSBT installs cable lugs up to 1000 mm² without impact
  • Hilti’s Jaibot robot automates repetitive overhead drilling

‍

Subscribe to newsletter

Subscribe to receive the latest blog posts to your inbox every week.

Please confirm your GDPR consent to join our mailing list.
By subscribing you agree to with our Privacy Policy.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Frequently asked questions

Why do predictive maintenance programs fail even with good sensors?

Because data alone does not explain a failure. Sensors need recorded failure times to be read against, and teams need alerts they trust and know how to act on. One plant still cut reactive work from 74% to 19% by combining planning, scheduling and PM and PdM findings.

Can PLC data detect bearing faults for AI predictive maintenance?

Usually not. A 10 ms PLC scan delivers 100 samples a second, while bearing defects ring at thousands of hertz. In a simulation, overall vibration moved about 1% at PLC rate, but at 25.6 kS/s the envelope spectrum showed the defect frequency about 25 times higher.

How powerful are heavy-duty cordless tools today?

Powerful enough to replace fuel and cords on demanding jobs. Hilti’s TE 8-22 drilled 3,131 holes in 24 hours for a Guinness World Records title. The DSH 900-22 cut-off saw matches 90cc gas performance, and the TE 1000-22 breaks up to 250 kg of concrete per charge.

No items found.

Want to see the posts voices behind this summary?

This week’s roundup (CW 45/ 46) brings you the Best of LinkedIn on Connected Tools & Equipment:

→ 70 handpicked posts that cut through the noise

→ 35 fresh voices worth following

→ 1 deep dive you don’t want to miss